Access width and platform load
The 0.81 m models suit narrower openings. The 1.15–1.40 m chassis provide different load and height combinations. Confirm every doorway, turn and floor-loading limit.
HS E-Drive Scissor Lifts
Position maintenance and installation crews with proportional controls and direct electric travel. The E-Drive system reduces travel energy consumption compared with the hydraulic-drive layout, supporting longer operation between charges.
ForkFocus equipment supply · Configuration support · Inspection · Export shipment · After-sales assistance
Compare models and specificationsCompare other AWP types
Ask for a quote
Electric travel efficiency for daily indoor access
The HS E-Drive chassis combines AC travel motors, proportional travel and lift control, CAN-bus diagnostics and battery configurations matched to chassis size.
- AC electric travel drive
- The E-Drive layout uses AC motors for machine travel. The manufacturer identifies lower energy consumption and longer operation between charges compared with its hydraulic-drive layout.
- CAN-bus diagnostics
- The on-board display reports machine status and fault codes for routine fault finding.
- Battery configurations
- Maintenance-free lead-acid batteries are listed as standard. Hangcha lithium batteries are listed as model-specific options.
- Control and safety equipment
- Proportional control, anti-overturning protection, emergency descent and the published allowable-inclination limits govern machine operation.
Performance in Real Work
Indoor and outdoor worker rating
HS0812A, HS1012A and HS1212A list two indoor workers or one outdoor worker. The remaining models in this table list two indoor workers.
Battery and charger selection
Lead-acid and lithium capacities vary by model. Confirm charger input, shift duration, charging period and destination electrical supply.
Recommended applications
- Warehouse, workshop and industrial maintenance on firm floors.
- Tasks requiring electric travel, low operating noise and frequent machine repositioning.
- Sites where access width, platform load, charging and floor loading can be confirmed.
Application limits
- The ground requires crawler traction or a dedicated rough-terrain chassis.
- The work position requires horizontal outreach or access over an obstruction.
- The site exceeds the selected model width, load, worker rating or allowable-inclination limits.
Compare Other Aerial Work Platforms
Different work conditions may call for a different machine. Compare the options below, or tell ForkFocus the main task and working height for selection help. If you know the model, you can request a quote directly.
Your requirement
Doorway width or working height changes the chassis choice
AWP options to compare
Key difference to check
Compare the published chassis dimensions, working height and platform load. Battery and drive configurations remain model-specific.
Your requirement
The ground calls for a different chassis
AWP options to compare
Key difference to check
Compare tracked or wheeled traction, ground support, power and stabilised setup. Confirm the selected machine’s ground and inclination limits.
Your requirement
The work position needs horizontal outreach
AWP options to compare
Key difference to check
Compare working height, articulated reach, access dimensions and platform load against the obstacle instead of vertical scissor access.
Browse by equipment type
Scissor Lifts — Vertical access with a scissor platform.
Vertical Mast Lifts — Point access, with or without a jib.
Boom Lifts — Articulating & Telescopic — Horizontal reach and access around obstacles.
Why Hangcha
Electric travel efficiency for daily indoor access.
- AC travel motors improve travel energy efficiency.
- Proportional controls support smooth lift and positioning.
- CAN-bus diagnostics help identify faults for service.
- Lead-acid and model-specific lithium options support different charging arrangements.
Compare the scissor lifts available from ForkFocus.
Why ForkFocus
Access equipment supply backed by material handling expertise and ForkFocus 360° service.
- Application and model choice. Compare working height, platform load and doorway width for the work positions inside the facility.
- Equipment and configuration quotation. Lead-acid or lithium power is quoted against the site supply and shift schedule, with inspection, shipment and service documentation coordinated.
- One material handling supplier. Coordinate access equipment with forklifts and spare parts for the wider project.
- Support before and after shipment. Customer-appointed pre-shipment inspection, export coordination, manuals and remote after-sales assistance support the equipment purchase.
Select an E-Drive model and charging arrangement for your maintenance schedule. Send a model request or describe the work; ForkFocus will help with the remaining selection details.
Equipment supply with ForkFocus 360° service
Inspection and shipment you can check
Confirm the ordered equipment before dispatch. Customer-appointed third-party inspection is accepted, and packing and loading are coordinated for the agreed shipment.
Fast response after delivery
7×24 after-sales support: remote troubleshooting, parts identification and applicable manuals.
Stocked parts: quick preparation through our spare parts support.
Special, non-stock and imported parts: availability depends on the requested part.
Models and core specifications
Choose an E-Drive chassis for the building and task load
Narrow entrances: HS0808A and HS1008A are 0.81 m wide, with 8 m and 10 m working heights. The taller model carries 230 kg rather than 380 kg, so include personnel, tools and materials in the choice.
More platform load: HS0812A and HS1012A provide 450 kg main-platform capacity on a 1.15 m chassis. For 15.7 m work, compare the 1.25 m HS1612A with the 1.40 m HS1614A and the higher-load HS1614A-P.
ForkFocus can match the chassis and battery configuration to the access path and charging schedule. Indoor and outdoor worker ratings remain model-specific.
Working height, platform height, load, width and worker rating remain attached to the selected chassis.
| Model | Working height | Platform height | Platform load | Extension load | Overall width | Worker rating |
|---|---|---|---|---|---|---|
| HS0808A | 8 m | 6 m | 380 kg | 113 kg | 0.81 m | Indoor: 2 |
| HS1008A | 10 m | 8 m | 230 kg | 113 kg | 0.81 m | Indoor: 2 |
| HS0812A | 8 m | 6 m | 450 kg | 113 kg | 1.15 m | Indoor: 2 / Outdoor: 1 |
| HS1012A | 10 m | 8 m | 450 kg | 113 kg | 1.15 m | Indoor: 2 / Outdoor: 1 |
| HS1212A | 12 m | 10 m | 320 kg | 113 kg | 1.15 m | Indoor: 2 / Outdoor: 1 |
| HS1412A | 13.8 m | 11.8 m | 320 kg | 113 kg | 1.15 m | Indoor: 2 |
| HS1614A | 15.7 m | 13.7 m | 230 kg | 113 kg | 1.40 m | Indoor: 2 |
| HS1614A-P | 15.7 m | 13.7 m | 350 kg | 120 kg | 1.40 m | Indoor: 2 |
| HS1612A | 15.7 m | 13.7 m | 230 kg | 113 kg | 1.25 m | Indoor: 2 |
All nine models have a published 25% maximum slope rating. Elevated work is controlled by the separate allowable-inclination limits shown in the machine data.
Get a quote for your application
Know the model? Send the model, quantity and destination for a quotation.
Need help choosing? Tell us the working height and where the lift will be used.
ForkFocus will help you compare models and configurations, then quote the equipment. Other technical details can follow during selection.
Ask for a quoteFrequently asked questions
Which HS E-Drive models have a 0.81 m overall width?
HS0808A and HS1008A have a published overall width of 0.81 m. Door clearances, turning space and floor loading still require a site check.
Which HS E-Drive model has the highest platform load?
HS0812A and HS1012A each have a published 450 kg main-platform load. The extension-platform load is 113 kg.
Does the 25% slope rating permit elevated work on that slope?
No. The slope rating applies to travel. Elevated operation remains limited by the published allowable inclination, ground condition and machine safety system.
Talk to ForkFocus about your access equipment
Request a quotation by model, quantity and destination, or send the work height and application for selection assistance. Incomplete specifications are welcome.