Hangcha Forklifts › Aerial Work Platforms › Vertical Mast Lifts
Compare Hangcha scissor lifts for a larger platform and Hangcha boom lifts when the task requires more horizontal outreach.
Hangcha Vertical Mast Lift USP
Compact chassis
Small machine width and tight turning make the HV range suitable for doorways, aisles and indoor maintenance routes.
Three operating layouts
Self-propelled, push-around and jib-type machines allow the fleet to match repositioning frequency and outreach without overspecifying the chassis.
Indoor operating package
Non-marking tyres, proportional controls, emergency lowering, pothole protection and onboard diagnostics support controlled work on finished floors.
Three practical configurations
Self-propelled mast lifts
The operator can reposition the machine from the platform, improving productivity during repeated maintenance points along an aisle or production line.
Push-around mast lifts
A simpler choice for occasional maintenance where low machine weight, compact storage and manual positioning are acceptable.
Jib-type mast lifts
A small articulating jib provides limited outreach over an obstacle. The extra reach must be balanced against machine width, weight and turning clearance.
Hangcha vertical mast lift models
The HV range separates self-propelled, push-around and jib-type machines. The model must be matched to working height, platform load, doorway width and repositioning frequency.
Self-propelled single-mast models
| LC chassis | HV80D-LC and HV95D-LC |
|---|---|
| HV chassis | HV60D, HV70D and HV80D |
| Published range | 5.6–9.5 m working height and 125–227 kg platform load, depending on model. |
Push-around single-mast models
| Models | HV70M-LC, HV80M-LC, HV100M-LC, HV110M-LC, HV120M-LC and HV140M-LC |
|---|---|
| Published range | 6.7–14 m working height and 120–150 kg platform load, depending on model. |
Self-propelled jib models
| HV110AJ | 11.22 m working height, 3 m horizontal extension and 210 kg capacity. |
|---|---|
| HV120AJ | 12 m working height, 5.5+0.5 m horizontal extension and 200 kg capacity. |
How we read the HV Series range
Hangcha HV self-propelled and push-around machines cover several working-height and platform-capacity combinations. Published working heights extend from about 5.6 to 14 metres across the different HV configurations.
Features such as proportional control, non-marking tyres, emergency lowering, pothole protection and onboard diagnostics support indoor maintenance work. The correct model still depends on the narrowest door, allowable floor load and the need to travel at height.
| Working height | Measure the task height and overhead restrictions. Do not select solely by the tallest job in the building. |
|---|---|
| Machine width | Confirm every doorway, lift entrance and aisle turn on the route to the work point. |
| Floor load | Check machine weight, wheel loading and finished-floor limits, particularly in public buildings and mezzanine areas. |
| Propulsion | Self-propelled machines suit frequent repositioning. Push-around models suit occasional jobs and lighter transport requirements. |
| Platform capacity | Operator, tools and replacement components must remain within the rated platform load. |
ForkFocus checks the complete access route
We confirm more than working height. Doorways, lift capacity, turning radius, floor condition, charging supply and the task position are reviewed before the configuration is fixed.
Inspection, spare-parts planning and international shipment can be coordinated through our 360° service.
Required working height, narrowest doorway, turning space, floor-load limit, self-propelled or push-around preference, platform load and destination.
Vertical mast lift FAQ
When is a vertical mast lift better than a scissor lift?
When the job requires a smaller footprint, lower machine weight and tighter turning rather than a large work platform.
Can the operator drive at full height?
Selected self-propelled HV models permit travel at full height. The exact model and site condition must be confirmed before use.
Do non-marking tyres mean every floor is safe?
No. They protect floor appearance, but allowable floor loading and wheel loads still need checking.
What warranty and payment terms apply?
Warranty is normally 1–2 years or 2,000 working hours, whichever comes first, depending on the confirmed machine and order. Normal payment terms are 30% deposit and 70% balance before delivery; special orders may require special terms.