ForkFocus Your most practical material handling solution provider Get a Solution

Hangcha XC Series 4.0-5.0 Tonne Electric Forklifts

Where this truck fits

Mid-capacity lithium-ion trucks for heavier factory pallets and mixed warehouse-yard travel paths.

Final capacity depends on the actual load centre, lift height and hydraulic attachment. A long load or clamp can require the next chassis size.

Working advantages

  • Lithium-ion chassis packaging
  • Wide-view mast
  • Regenerative braking
  • Optional cab and attachments
  • Residual-capacity review for high mast or clamps

Information required before quotation

Provide the load weight and dimensions, lift height, aisle or yard condition, shifts, charger supply and attachment requirement.

Load centre Confirm from the real load dimensions, not an assumed 500 mm.
Mast Lift height, free lift, lowered height and overhead clearance.
Travel path Floor, ramp, outdoor surface and turning or aisle space.
Battery Operating hours, charging window and available mains supply.
Hydraulics Attachment type, carriage class and number of functions.

Hangcha Product USP

  • Lithium-ion chassis packaging. Check the battery arrangement and matching charger as part of the supplied truck.

  • Wide-view mast. Confirm the actual mast and visibility around the load; a clamp can change the view.

  • Regenerative braking. Compare the specified braking functions with the travel pattern and handling cycle.

  • Optional cab and attachments. Include weather protection, overhead clearance and the required hydraulic functions in the equipment list.

Identify the Full XC Model Suffix

Two specification groups are shown separately. The XD6-SI28 and XCY2-SI codes belong to different listed configurations. Do not combine one group’s model code with another group’s battery or travel-speed figure.

XD6-SI28 Specification Group

Complete model designation Rated load and reference centre Dimensions to compare
CPD40-XD6-SI28 4,000 kg at 500 mm Width 1425/1930 mm; turning radius 2550 mm
CPD45-XD6-SI28 4,500 kg at 500 mm Width 1425/1930 mm; turning radius 2550 mm
CPD50-XXD6-SI28 5,000 kg at 500 mm Width 1425/1930 mm; turning radius 2550 mm
CPD50-XD6-SI28 5,000 kg at 600 mm Width 1425/1930 mm; turning radius 2550 mm

XCY2-SI Specification Group

Complete model designation Rated load and reference centre Dimensions to compare
CPD40-XCY2-SI 4,000 kg at 500 mm Width 1425/1930 mm; turning radius 2550 mm
CPD45-XCY2-SI 4,500 kg at 500 mm Width 1425/1930 mm; turning radius 2550 mm
CPD50-XCXY2-SI 5,000 kg at 500 mm Width 1425/1930 mm; turning radius 2550 mm
CPD50-XCY2-SI 5,000 kg at 600 mm Width 1425/1930 mm; turning radius 2550 mm

Performance in Real Work

Compare XD6-SI28 group XCY2-SI group
Laden travel speed 18 km/h 19 km/h
Laden lift speed 0.350 m/s for the four listed versions 350 mm/s for the four listed versions
Battery reference 80 V / 608 Ah in the listed voltage/capacity row 80 V / 608 Ah in the listed voltage/capacity row

Keep units and equipment lists aligned. The specification tables use different lift-speed units, so 350 mm/s equals 0.350 m/s. A higher listed travel speed does not establish greater productivity on a short handling cycle.

500 mm and 600 mm Load Centres

Both groups separate compact 5 t and 600 mm-centre 5 t positions. Measure the actual load centre, including the load shape and any attachment offset. Confirm the mast chart at the required height rather than choosing the model by tonnage alone.

Single or dual front tyres change the width. The tables list 1,425 / 1,930 mm overall widths. Confirm the tyre arrangement on the quotation and measure the aisle, loading platform and doorway with that width.

Configuration Listed gradeability
XD6-SI28 group 15 / 20% laden / unladen
XCY2-SI group 16 / 20% laden / unladen

Plan repeated ramp work separately. Maximum gradeability is a test specification. Frequent ramp duty also needs braking, tyre grip, load stability and heat assessment.

Series Comparison

Production, receiving and yard transfer. Compare the selected tyres, floor condition, ramps, braking and weather protection for the actual site. An electric counterbalance forklift is not automatically suitable for loose or badly uneven ground.

Clamp-equipped work. Match the load dimensions, clamp weight, pressure and flow. The clamp must have its own suitable rated capacity in addition to the truck-side capacity check.

Other 4–5 t Platforms

For another 4–5 t configuration, compare XE Series lithium forklifts and X Series electric forklifts. For a larger working load, compare XC 6–10 t lithium forklifts against the same height and load centre.

Discuss Your Working Conditions

Why Hangcha

Compare a defined truck configuration. The model groups and dimensions on this page distinguish trucks that share a nominal tonnage.

  • Use the full model suffix and rated load centre.
  • Compare the actual chassis, tyre arrangement and clearance.
  • Match the mast chart and selected battery specification.

Why ForkFocus

Put the work requirements into the quotation. ForkFocus can coordinate the truck, attachment, battery and shipment around the proposed application.

  • A known model, quantity and destination allow a first request.
  • Undecided buyers can send the main load and lift requirements.
  • Detailed capacity, hydraulics and parts checks follow with the selected configuration.
A model-only request ForkFocus configuration review
Nominal rated load Actual load centre, required height and attachment-adjusted capacity.
Standard truck configuration Mast, tyres, battery and charger for the intended work.
Attachment name Carriage, pressure, flow, functions, mass and geometry.
Basic parts request Model-specific wear-parts identification and support requirements.
Truck supply Packing, shipment and agreed inspection scope.
Hangcha XC Series 4–5 tonne lithium forklift technical detail
Manufacturer detail view. Check the exact model and equipment list before quotation.

ForkFocus Quotation and Configuration Support

Known model or undecided specification? For a model already selected, send the complete model code, quantity and destination. If you need help selecting, send the main load weight, lift height and working conditions, with detailed drawings to follow.

Coordinate the complete equipment package. ForkFocus can compare the mast and applicable capacity chart, attachment mounting, hydraulic functions, battery, charger and wear-parts identification for the proposed truck.

Check attachment compatibility, capacity with an attachment and ForkFocus 360 Service when planning the supplied configuration.

See the Electric Forklift in Operation

Manufacturer XC Series 4.0–5.0 t lithium forklift demonstration. Confirm the complete model suffix and quoted equipment.

Watch the manufacturer video on YouTube

Model-Specific Selection Questions

Can XD6-SI28 and XCY2-SI codes be interchanged?

No. The two listed groups have different performance references. Confirm the complete suffix and equipment list on the quotation.

Why confirm single or dual front tyres?

The tyre arrangement changes the overall width used for clearance and aisle checks. Use the dimensions for the quoted configuration.

Configuration questions

Can the nominal capacity be used at every lift height?

No. Residual capacity changes with mast height, load centre and attachment. The working chart must be checked.

Can ForkFocus prepare a tender configuration?

Yes. Send the technical schedule and required documents so the truck, mast, battery, tyres and attachments can be checked as one package.

Confirm this truck against the real duty

Our forklift team will review the configuration before quotation.

Request Technical Matching

Ask For A quick Quote

We respond within two hours during our working hours, Monday to Friday, 9:00–18:00 Beijing Time (UTC+8). Enquiries received outside those working hours receive a response within eight hours. please pay attention to the email with the suffix “@forkfocus.com”.