Where this truck fits
Mid-capacity electric forklifts for heavier pallets, production equipment and industrial attachments.
Final capacity depends on the actual load centre, lift height and hydraulic attachment. A long load or clamp can require the next chassis size.
Working advantages
- Compact wheelbase and reduced front overhang
- Wide-view mast and low dashboard
- Automatic buffered fork lowering
- Multiple travel modes
- Optional side battery removal and fork positioner
Information required before quotation
Provide the load weight and dimensions, lift height, aisle or yard condition, shifts, charger supply and attachment requirement.
| Load centre | Confirm from the real load dimensions, not an assumed 500 mm. |
|---|---|
| Mast | Lift height, free lift, lowered height and overhead clearance. |
| Travel path | Floor, ramp, outdoor surface and turning or aisle space. |
| Battery | Operating hours, charging window and available mains supply. |
| Hydraulics | Attachment type, carriage class and number of functions. |
Hangcha Product USP
-
Two near-5 t load-centre positions. The 4,990 kg / 500 mm and 5,000 kg / 600 mm entries support a more useful comparison than a common 5 t label.
-
Lead-acid and lithium variants. Separate complete model suffixes make the energy configuration part of the quotation.
-
Buffered lowering and travel modes. Compare the operating modes and lowering control with the handling task and driver requirements.
-
Optional side battery removal. Confirm the specified arrangement and allow the working space needed for battery handling.
4.0 t, 4.5 t and Two Different 5 t Configurations
The compact near-5 t specification is listed as 4,990 kg at 500 mm. The full 5,000 kg configuration is listed at 600 mm. Retain that distinction when comparing load dimensions, mast charts and price.
| Complete model designation | Rated load and reference centre | Dimensions to compare |
|---|---|---|
| CPD40-XC5 / CPD40-XD3 / CPD40-XC5-A | 4,000 kg at 500 mm | Width 1385 mm; turning radius 2540 mm |
| CPD45-XC5 / CPD45-XD3 / CPD45-XC5-A | 4,500 kg at 500 mm | Width 1385 mm; turning radius 2600 mm |
| CPD50-XXC5 / CPD50-XXD3 / CPD50-XXC5-A | 4,990 kg at 500 mm | Width 1494 mm; turning radius 2600 mm |
| CPD50-XC5 / CPD50-XD3 / CPD50-XC5-A | 5,000 kg at 600 mm | Width 1494 mm; turning radius 2680 mm |
| CPD40-XC5-I / CPD40-XD3-I / CPD40-XC5-IA | 4,000 kg at 500 mm | Width 1385 mm; turning radius 2600 mm |
| CPD45-XC5-I / CPD45-XD3-I / CPD45-XC5-IA | 4,500 kg at 500 mm | Width 1385 mm; turning radius 2600 mm |
| CPD50-XXC5-I / CPD50-XXD3-I / CPD50-XXC5-IA | 4,990 kg at 500 mm | Width 1494 mm; turning radius 2620 mm |
| CPD50-XC5-I / CPD50-XD3-I / CPD50-XC5-IA | 5,000 kg at 600 mm | Width 1494 mm; turning radius 2680 mm |
Keep the corrosion-resistant variants separate. The -A and -IA model codes are the separately listed corrosion-resistant configurations. The manufacturer notes that these versions do not offer dual front wheels.
Confirm the quoted version and tyre arrangement. Do not interchange suffixes.
Compare Battery Type With the Operating Shift
The 80 V system has separate battery configurations. The table lists lead-acid capacities of 600 or 700 Ah and lithium configurations at 604 Ah. These figures identify the tabulated versions; they are not a promise of identical runtime or interchangeable batteries.
| Work pattern | What to compare before purchase |
|---|---|
| A planned charging stop after a shift | Available charger input, battery capacity, battery maintenance arrangements and the real duty cycle. |
| Short charging breaks during work | Whether the selected battery/BMS and charger permit the proposed charging pattern. |
| Frequent attachments and hydraulic movement | Attachment flow and pressure, number of functions, truck-side capacity and energy use during the actual work. |
Dimensions Can Change Within the Same Series
The listed 4.0–4.5 t chassis are 1,385 mm wide. The two heavier positions are listed at 1,494 mm. Check the actual tyre arrangement, pallet aisle and door clearance instead of scaling up a smaller truck’s dimensions.
Check the laden working point. The rated load is referenced to a particular load centre. Fork length, a high mast or a clamp changes the capacity assessment; the nominal tonnage is not a residual-capacity result.
Performance in Real Work
| Model group | Travel, laden / unladen | Lift, laden / unladen | Max. gradeability, laden / unladen |
|---|---|---|---|
| CPD40-XC5 / CPD40-XD3 / CPD40-XC5-A | 16.5/16.5 km/h | 0.33/0.475 m/s | 17/20% |
| CPD50-XXC5 / CPD50-XXD3 / CPD50-XXC5-A | 16/16.5 km/h | 0.31/0.475 m/s | 16/20% |
| CPD50-XC5 / CPD50-XD3 / CPD50-XC5-A | 15.5/16.5 km/h | 0.31/0.475 m/s | 15/19% |
Compare the handling cycle. Travel distance, lifting height, loading frequency and hydraulic work determine whether these parameters fit the shift. Compare these figures with the actual handling task.
Plan repeated ramp work separately. Maximum gradeability is a test specification. Frequent ramp duty also needs braking, tyre grip, load stability and heat assessment.
Series Comparison
Compare XC 4–5 t lithium forklifts and XE 4–5 t lithium forklifts at the same load centre, lift height, tyre layout and charging requirement. The quoted equipment and battery specification provide a useful comparison; the series name alone does not establish operating cost.
Discuss Your Working Conditions
Why Hangcha
Compare a defined truck configuration. The model groups and dimensions on this page distinguish trucks that share a nominal tonnage.
- Use the full model suffix and rated load centre.
- Compare the actual chassis, tyre arrangement and clearance.
- Match the mast chart and selected battery specification.
Why ForkFocus
Put the work requirements into the quotation. ForkFocus can coordinate the truck, attachment, battery and shipment around the proposed application.
- A known model, quantity and destination allow a first request.
- Undecided buyers can send the main load and lift requirements.
- Detailed capacity, hydraulics and parts checks follow with the selected configuration.
| A model-only request | ForkFocus configuration review |
|---|---|
| Nominal rated load | Actual load centre, required height and attachment-adjusted capacity. |
| Standard truck configuration | Mast, tyres, battery and charger for the intended work. |
| Attachment name | Carriage, pressure, flow, functions, mass and geometry. |
| Basic parts request | Model-specific wear-parts identification and support requirements. |
| Truck supply | Packing, shipment and agreed inspection scope. |

ForkFocus Quotation and Configuration Support
Known model or undecided specification? For a model already selected, send the complete model code, quantity and destination. If you need help selecting, send the main load weight, lift height and working conditions, with detailed drawings to follow.
Coordinate the complete equipment package. ForkFocus can compare the mast and applicable capacity chart, attachment mounting, hydraulic functions, battery, charger and wear-parts identification for the proposed truck.
Check attachment compatibility, capacity with an attachment and ForkFocus 360 Service when planning the supplied configuration.
See the Electric Forklift in Operation
Manufacturer X Series electric forklift demonstration. This is a family video, not proof of every 4–5 t configuration.
Watch the manufacturer video on YouTube
Model-Specific Selection Questions
Why is one near-5 t model listed at 4,990 kg?
That is the rated figure in the referenced configuration table at 500 mm. Keep it separate from the 5,000 kg / 600 mm version; do not round it up when specifying the load.
Is a 5 t nameplate enough for a carton or paper-roll clamp?
No. Check the selected mast chart at the working height, the actual load centre and attachment mass and geometry. The clamp must independently have an adequate rating.
Configuration questions
Can the nominal capacity be used at every lift height?
No. Residual capacity changes with mast height, load centre and attachment. The working chart must be checked.
Can ForkFocus prepare a tender configuration?
Yes. Send the technical schedule and required documents so the truck, mast, battery, tyres and attachments can be checked as one package.
Confirm this truck against the real duty
Our forklift team will review the configuration before quotation.

