ForkFocus Your most practical material handling solution provider Get a Solution

Hangcha XE Series 4.0-5.0 Tonne Electric Forklifts

Where this truck fits

Mid-capacity XE trucks for heavier industrial loads, ramps and outdoor transfer paths.

Final capacity depends on the actual load centre, lift height and hydraulic attachment. A long load or clamp can require the next chassis size.

Working advantages

  • Heavy-duty axle and tyre arrangements
  • Ground-clearance options
  • Battery heating on specified versions
  • Electric parking brake option
  • Mast and attachment review by residual capacity

Information required before quotation

Provide the load weight and dimensions, lift height, aisle or yard condition, shifts, charger supply and attachment requirement.

Load centre Confirm from the real load dimensions, not an assumed 500 mm.
Mast Lift height, free lift, lowered height and overhead clearance.
Travel path Floor, ramp, outdoor surface and turning or aisle space.
Battery Operating hours, charging window and available mains supply.
Hydraulics Attachment type, carriage class and number of functions.

Available Models and Configurations

The two 5.0 t models are rated at different load centres. CPD50-XEXY2-SI is listed at 500 mm; CPD50-XEY2-SI is listed at 600 mm. Treat that distinction as a selection input, not an interchangeable model name.

Model Rated load and reference centre Space requirement
CPD40-XEY2-SI 4,000 kg at 500 mm Width 1420/1926 mm
Turning radius 2680 mm
CPD45-XEY2-SI 4,500 kg at 500 mm Width 1490/1926 mm
Turning radius 2680 mm
CPD50-XEXY2-SI 5,000 kg at 500 mm Width 1490/1926 mm
Turning radius 2740 mm
CPD50-XEY2-SI 5,000 kg at 600 mm Width 1490/1926 mm
Turning radius 2740 mm
High-vision versions: all four model codes

CPD40-XEY2-SIGW, CPD45-XEY2-SIGW, CPD50-XEXY2-SIGW, CPD50-XEY2-SIGW.

Confirm overhead-guard height and the required mast before choosing this version. Similar model codes do not establish identical clearance.

Hangcha Product USP

  • 80 V permanent-magnet drive and lift system. Compare shift demand and charging arrangements with the selected battery, rather than assuming one charge covers every shift.
  • Access for maintenance. Tool-free side and lower panels allow access to service components.
  • Pneumatic-tyre configurations. The standard table specifies tyre sizes and single/dual-front width. Confirm the actual floor, wheel loading and clearance.
  • Optional parking-brake and cab arrangements. Confirm the equipment list and overhead height of the quoted version.

Performance in Real Work

Parameter What changes the purchase decision
Laden travel speed 19 km/h across the four listed standard configurations.
Laden lift speed 0.450 m/s (4.0 t), 0.430 m/s (4.5 t), 0.400 m/s (both 5.0 t versions).
Battery reference 80 V / 460 Ah standard table configuration. Battery options and charger must be checked together.
Attachment supply 185 bar and 65 L/min listed at the truck. Confirm the attachment’s permitted pressure and flow separately.
Gradeability, laden / unladen 17 / 22% at 4.0–4.5 t; 16 / 20% for both listed 5.0 t positions.
Hangcha XE 4–5 Tonne Lithium Forklifts handling industrial loads
Match the load dimensions, floor, mast clearance and charging arrangement before confirming a truck.

Practical Checks Before Choosing the Tonnage

  1. Separate the two 5 t reference centres. A 600 mm load centre changes the comparison with a compact 5 t truck rated at 500 mm.

  2. Check pallet aisle width as well as turning radius. The turn radius is 2,680 or 2,740 mm, but stacking-aisle requirements also depend on pallet orientation and load length.

  3. Read the selected mast table. The standard table uses a 3,000 mm lift. A higher mast or an attachment needs its own working-point capacity check.

  4. Match charger and supply. The 80 V battery reference alone does not define charger output, input supply or BMS compatibility.

  5. Treat maximum gradeability as a test parameter. Frequent ramps also require an assessment of load, tyre grip, braking, travel distance and heat.

  6. Check hydraulic limits on both sides. Truck outlet pressure is not automatically the permitted clamp pressure. Confirm the attachment circuit and any pressure regulation.

Series Comparison

Compare Selection implication
XE compact 5 t at 500 mm vs XE 5 t at 600 mm Compare the actual cargo centre, fork section, overall length and mast chart. A common 5 t label does not make the configurations equivalent.
XE vs XC 4–5 t lithium forklifts Compare the same load centre, mast, tyre layout, battery and work cycle before comparing price.
XE vs X 4–5 t electric forklifts Check the specified electrical system, battery replacement arrangement and site charging plan. Do not compare series names alone.

Why Hangcha

Compare a defined truck configuration, rather than a nominal tonnage alone. The published model tables separate load centres, chassis dimensions, electrical configurations and mast options.

  • Full model codes distinguish configurations that share the same tonnage.
  • Mast tables and drawings support height and clearance checks.
  • Battery, hydraulic and maintenance details help plan the complete installation.

Why ForkFocus

ForkFocus connects the truck specification with the work you need to do. Send a known model, quantity and destination, or the main load and lift requirements if you need selection assistance.

  • Compare actual load centre, mast and available capacity.
  • Coordinate the attachment, hydraulic functions and mounting.
  • Plan the charger, spare parts and shipment with the truck.
A model-only quotation ForkFocus configuration review
Nominal tonnage and model code Load dimensions, required height and applicable load chart.
Standard carriage and hydraulics Attachment mass, effective thickness, pressure, flow and valve functions.
Truck supply Battery/charger supply, wear-parts identification and packing requirements.

See the Electric Forklift in Operation

Hangcha XE series technology and operating demonstration. The video explains the product family, not every 4–5 t configuration.

Selection Questions

Will the listed rated load remain available with a clamp?

No single rated figure covers every installed attachment. Check the truck chart at the required height, the attachment mass and geometry, and the attachment’s own rated capacity.

Can it replace a diesel forklift on our site?

Compare the actual surface, gradients, travel distance, shifts and charging supply. Outdoor capability does not make an electric counterbalance forklift a rough-terrain forklift.

What is needed for a first quotation?

A model code, quantity and destination are enough for an initial request. If the model is undecided, send the load weight, lift height and main working conditions. Drawings and detailed technical checks can follow.

Watch the manufacturer’s series video on YouTube

For the installed system, check forklift attachment compatibility, attachment capacity, model-specific spare parts and ForkFocus 360 Service.

Discuss Your Forklift Configuration

Configuration questions

Can the nominal capacity be used at every lift height?

No. Residual capacity changes with mast height, load centre and attachment. The working chart must be checked.

Can ForkFocus prepare a tender configuration?

Yes. Send the technical schedule and required documents so the truck, mast, battery, tyres and attachments can be checked as one package.

Confirm this truck against the real duty

Our forklift team will review the configuration before quotation.

Request Technical Matching

Ask For A quick Quote

We respond within two hours during our working hours, Monday to Friday, 9:00–18:00 Beijing Time (UTC+8). Enquiries received outside those working hours receive a response within eight hours. please pay attention to the email with the suffix “@forkfocus.com”.