ForkFocus Your most practical material handling solution provider Get a Solution

Hangcha XC Series 6.0-10.0 Tonne Electric Forklifts

Where this truck fits

Heavy lithium-ion counterbalance trucks for industrial loads and project applications.

Final capacity depends on the actual load centre, lift height and hydraulic attachment. A long load or clamp can require the next chassis size.

Working advantages

  • Heavy chassis and mast configurations
  • Battery and charger matching by duty cycle
  • Tyre selection for yard conditions
  • Cab and weather-protection options
  • Attachment and residual-capacity calculation

Information required before quotation

Provide the load weight and dimensions, lift height, aisle or yard condition, shifts, charger supply and attachment requirement.

Load centre Confirm from the real load dimensions, not an assumed 500 mm.
Mast Lift height, free lift, lowered height and overhead clearance.
Travel path Floor, ramp, outdoor surface and turning or aisle space.
Battery Operating hours, charging window and available mains supply.
Hydraulics Attachment type, carriage class and number of functions.

Hangcha Product USP

  • Separate standard and long-centre 8 t models. A 600 mm or 900 mm rating can be compared with the actual cargo geometry.

  • Two complete specification groups. The XCY2/XCLY2 and XCD4/XCLD4 suffixes distinguish the listed performance configurations.

  • Defined chassis dimensions. The tabulated widths and turning radii support access and stacking-space checks.

  • 96 V battery configurations. The 690 and 920 Ah references help define a charging quotation, without promising a particular runtime.

Six Load Positions and Two Model Groups

There are two distinct 8 t configurations. CPD80-XCY2-SI and CPD80-XCD4-SI are listed at 600 mm. The XCLY2 and XCLD4 versions are listed at 900 mm.

Use the correct reference centre. The longer reference load centre is part of the truck configuration, not an attachment-capacity allowance.

Complete model designation Rated load and reference centre Dimensions to compare
CPD60-XCY2-SI 6,000 kg at 600 mm Width 1946/2006 mm; turning radius 3140 mm
CPD70-XCY2-SI 7,000 kg at 600 mm Width 1946/2006 mm; turning radius 3140 mm
CPD80-XCY2-SI 8,000 kg at 600 mm Width 1946/2006 mm; turning radius 3140 mm
CPD80-XCLY2-SI 8,000 kg at 900 mm Width -/2068 mm; turning radius 3350 mm
CPD90-XCY2-SI 9,000 kg at 600 mm Width -/2068 mm; turning radius 3350 mm
CPD100-XCY2-SI 10,000 kg at 600 mm Width -/2160 mm; turning radius 3350 mm
CPD60-XCD4-SI 6,000 kg at 600 mm Width 1946/2006 mm; turning radius 3140 mm
CPD70-XCD4-SI 7,000 kg at 600 mm Width 1946/2006 mm; turning radius 3140 mm
CPD80-XCD4-SI 8,000 kg at 600 mm Width 1946/2006 mm; turning radius 3140 mm
CPD80-XCLD4-SI 8,000 kg at 900 mm Width -/2068 mm; turning radius 3350 mm
CPD90-XCD4-SI 9,000 kg at 600 mm Width -/2068 mm; turning radius 3350 mm
CPD100-XCD4-SI 10,000 kg at 600 mm Width -/2160 mm; turning radius 3350 mm

What Changes at the Larger Chassis?

Turning space increases from 3,140 to 3,350 mm. The standard 6–8 t positions use the smaller listed turning radius. The 8 t long-centre, 9 t and 10 t positions use the larger figure.

Check stacking space separately. Pallet aisle width still needs its load-dependent check.

Tyre layout is part of the width specification. The 6–8 t standard positions list 1,946 / 2,006 mm. The larger positions list dual-front widths of 2,068 or 2,160 mm.

Check the supplied tyre arrangement. Verify gates, loading ramps and floor loading.

Performance in Real Work

Parameter XCY2 / XCLY2 group XCD4 / XCLD4 group
Laden travel, 6–7 t 18 km/h 18 km/h
Laden travel, standard 8 t 17 km/h 17 km/h
Laden travel, 8 t long-centre and 9–10 t 17 km/h 15 km/h
Laden lift, 6 t 320 mm/s 380 mm/s
Battery reference 96 V / 690 Ah or 920 Ah 96 V / 690 Ah or 920 Ah

Compare the full duty cycle. Travel speed and lift speed are separate parameters. Travel distance, load weight, lifting height, auxiliary hydraulics and charging opportunities determine how a configuration fits the shift.

Configuration Listed gradeability
Both listed suffix groups 6 t: 19/29%; 7 t: 18/27%; standard 8 t: 16/25%; long-centre 8 t and 9 t: 16/23%; 10 t: 15/20%. Laden/unladen.

Plan repeated ramp work separately. Maximum gradeability is a test specification. Frequent ramp duty also needs braking, tyre grip, load stability and heat assessment.

Series Comparison

Describe the load geometry before choosing the nominal tonnage. A large roll, long steel load or clamp can move the centre of gravity forward. ForkFocus can compare the drawing with the truck chart, fitted attachment and actual lift height.

Check hydraulic suitability independently. The truck outlet and the attachment’s permitted pressure, flow and number of functions must match. A higher-capacity truck does not automatically provide the correct clamp pressure.

Other 6–10 t Platforms

Compare the X 6–10 t electric forklifts and XE 6–10 t lithium forklifts for the same working load, mast, battery plan and floor. For continuous outdoor work, also compare heavy-duty IC forklifts with the site’s emissions and energy requirements.

Discuss Your Working Conditions

Why Hangcha

Compare a defined truck configuration. The model groups and dimensions on this page distinguish trucks that share a nominal tonnage.

  • Use the full model suffix and rated load centre.
  • Compare the actual chassis, tyre arrangement and clearance.
  • Match the mast chart and selected battery specification.

Why ForkFocus

Put the work requirements into the quotation. ForkFocus can coordinate the truck, attachment, battery and shipment around the proposed application.

  • A known model, quantity and destination allow a first request.
  • Undecided buyers can send the main load and lift requirements.
  • Detailed capacity, hydraulics and parts checks follow with the selected configuration.
A model-only request ForkFocus configuration review
Nominal rated load Actual load centre, required height and attachment-adjusted capacity.
Standard truck configuration Mast, tyres, battery and charger for the intended work.
Attachment name Carriage, pressure, flow, functions, mass and geometry.
Basic parts request Model-specific wear-parts identification and support requirements.
Truck supply Packing, shipment and agreed inspection scope.
Hangcha XC Series 6–10 tonne lithium forklift technical detail
Manufacturer detail view. Check the exact model and equipment list before quotation.

ForkFocus Quotation and Configuration Support

Known model or undecided specification? For a model already selected, send the complete model code, quantity and destination. If you need help selecting, send the main load weight, lift height and working conditions, with detailed drawings to follow.

Coordinate the complete equipment package. ForkFocus can compare the mast and applicable capacity chart, attachment mounting, hydraulic functions, battery, charger and wear-parts identification for the proposed truck.

Check attachment compatibility, capacity with an attachment and ForkFocus 360 Service when planning the supplied configuration.

See the Electric Forklift in Operation

Manufacturer XC Series crossover-platform overview. It explains the family, not the capacity or equipment of every 6–10 t model.

Watch the manufacturer video on YouTube

Model-Specific Selection Questions

Does every 8 t XC model have a 900 mm rating?

No. The standard versions are listed at 600 mm; the long-centre XCLY2 and XCLD4 versions are listed at 900 mm. Confirm the actual model and mast chart.

Is the larger truck always the better choice?

A larger chassis also changes turning space, width and floor loading. Choose the capacity needed at the working point, then check the physical access and duty cycle.

Configuration questions

Can the nominal capacity be used at every lift height?

No. Residual capacity changes with mast height, load centre and attachment. The working chart must be checked.

Can ForkFocus prepare a tender configuration?

Yes. Send the technical schedule and required documents so the truck, mast, battery, tyres and attachments can be checked as one package.

Confirm this truck against the real duty

Our forklift team will review the configuration before quotation.

Request Technical Matching

Ask For A quick Quote

We respond within two hours during our working hours, Monday to Friday, 9:00–18:00 Beijing Time (UTC+8). Enquiries received outside those working hours receive a response within eight hours. please pay attention to the email with the suffix “@forkfocus.com”.