ForkFocus Your most practical material handling solution provider Get a Solution

Hangcha XE Series 6.0-10.0 Tonne Electric Forklifts

Where this truck fits

Heavy XE lithium-ion forklifts for sustained industrial work and demanding yard applications.

Final capacity depends on the actual load centre, lift height and hydraulic attachment. A long load or clamp can require the next chassis size.

Working advantages

  • High-capacity lithium energy system
  • Heavy chassis and drive components
  • Cab and weather protection
  • Tyre and ground-clearance selection
  • Project-level mast and attachment configuration

Information required before quotation

Provide the load weight and dimensions, lift height, aisle or yard condition, shifts, charger supply and attachment requirement.

Load centre Confirm from the real load dimensions, not an assumed 500 mm.
Mast Lift height, free lift, lowered height and overhead clearance.
Travel path Floor, ramp, outdoor surface and turning or aisle space.
Battery Operating hours, charging window and available mains supply.
Hydraulics Attachment type, carriage class and number of functions.

Hangcha Product USP

  • Five rated-capacity positions. The 6, 7, 8, 9 and 10 t models are each identified by a complete code.

  • A common 600 mm reference centre. This makes the listed ratings comparable, while longer loads still need the selected chart.

  • Two chassis-size groups. The width and turning-radius changes show why the larger truck needs a separate site check.

  • 96 V lithium configurations and cab options. The battery references and weather-protection options help define the supplied equipment package.

Five XE Models, All Referenced to 600 mm

The model table covers 6, 7, 8, 9 and 10 t. All five listed ratings use a 600 mm reference load centre. A load centre longer than 600 mm needs the appropriate truck chart; do not treat the model code as approval for the heavier moment.

Complete model designation Rated load and reference centre Dimensions to compare
CPD60-XEY2-SI 6,000 kg at 600 mm Width -/1994 mm; turning radius 3360 mm
CPD70-XEY2-SI 7,000 kg at 600 mm Width -/1994 mm; turning radius 3360 mm
CPD80-XEY2-SI 8,000 kg at 600 mm Width -/2197 mm; turning radius 3740 mm
CPD90-XEY2-SI 9,000 kg at 600 mm Width -/2197 mm; turning radius 3740 mm
CPD100-XEY2-SI 10,000 kg at 600 mm Width -/2197 mm; turning radius 3740 mm

Performance in Real Work

Purchase factor 6–7 t group 8–10 t group
Listed overall width, dual front tyres 1,994 mm 2,197 mm
Turning radius 3,360 mm 3,740 mm
Laden travel speed 19 km/h 16 km/h
Battery reference 96 V / 560 Ah 96 V / 690 Ah

Allow for the larger truck around the load. The 8–10 t group needs more turning space and width. Check the actual travel path, loading ramp, door openings and floor capacity before treating the larger truck as a simple upgrade.

Lifting speed also changes with capacity. The listed laden lift speeds are 410, 360, 340, 280 and 280 mm/s for the 6, 7, 8, 9 and 10 t positions. Compare these with the required lifting height and cycle frequency.

Choose the Chassis Around the Work

Large industrial pallets and equipment. Measure load dimensions and centre of gravity, fork entry and required height. For an attachment, include its own weight and forward offset before selecting the truck-side capacity.

Mixed indoor and outdoor travel. Check floor joints, slopes, tyre grip, ground clearance and weather protection. Electric power does not remove the need to assess the outdoor surface.

Long shifts. Provide operating hours and available charging breaks. The 96 V label alone does not define runtime, charger input or the supply required at your site.

Configuration Listed gradeability
6 t and 7 t 20/30% and 19/30%, laden/unladen.
8 t, 9 t and 10 t 19/25%, 16/22% and 15/21%, laden/unladen.

Plan repeated ramp work separately. Maximum gradeability is a test specification. Frequent ramp duty also needs braking, tyre grip, load stability and heat assessment.

Series Comparison

The X 6–10 t range and XC 6–10 t range include a separately listed 8 t / 900 mm configuration. This XE table does not. Compare the exact mast chart, chassis size, battery and quotation equipment rather than transferring the 900 mm rating between series.

Discuss Your Working Conditions

Why Hangcha

Compare a defined truck configuration. The model groups and dimensions on this page distinguish trucks that share a nominal tonnage.

  • Use the full model suffix and rated load centre.
  • Compare the actual chassis, tyre arrangement and clearance.
  • Match the mast chart and selected battery specification.

Why ForkFocus

Put the work requirements into the quotation. ForkFocus can coordinate the truck, attachment, battery and shipment around the proposed application.

  • A known model, quantity and destination allow a first request.
  • Undecided buyers can send the main load and lift requirements.
  • Detailed capacity, hydraulics and parts checks follow with the selected configuration.
A model-only request ForkFocus configuration review
Nominal rated load Actual load centre, required height and attachment-adjusted capacity.
Standard truck configuration Mast, tyres, battery and charger for the intended work.
Attachment name Carriage, pressure, flow, functions, mass and geometry.
Basic parts request Model-specific wear-parts identification and support requirements.
Truck supply Packing, shipment and agreed inspection scope.
Hangcha XE Series 6–10 tonne lithium forklift technical detail
Manufacturer detail view. Check the exact model and equipment list before quotation.

ForkFocus Quotation and Configuration Support

Known model or undecided specification? For a model already selected, send the complete model code, quantity and destination. If you need help selecting, send the main load weight, lift height and working conditions, with detailed drawings to follow.

Coordinate the complete equipment package. ForkFocus can compare the mast and applicable capacity chart, attachment mounting, hydraulic functions, battery, charger and wear-parts identification for the proposed truck.

Check attachment compatibility, capacity with an attachment and ForkFocus 360 Service when planning the supplied configuration.

See the Electric Forklift in Operation

Manufacturer XE Series technology overview. The model and mast tables determine the listed 6–10 t configuration.

Watch the manufacturer video on YouTube

Model-Specific Selection Questions

Is there a 900 mm-centre XE model in this table?

No. All five models in this table are listed at 600 mm. A longer load requires the applicable chart; do not borrow a rating from X or XC models.

What changes when moving from 7 t to 8 t?

The listed width, turning radius, travel speed and battery configuration change. Check those differences against the actual site before requesting the larger truck.

Configuration questions

Can the nominal capacity be used at every lift height?

No. Residual capacity changes with mast height, load centre and attachment. The working chart must be checked.

Can ForkFocus prepare a tender configuration?

Yes. Send the technical schedule and required documents so the truck, mast, battery, tyres and attachments can be checked as one package.

Confirm this truck against the real duty

Our forklift team will review the configuration before quotation.

Request Technical Matching

Ask For A quick Quote

We respond within two hours during our working hours, Monday to Friday, 9:00–18:00 Beijing Time (UTC+8). Enquiries received outside those working hours receive a response within eight hours. please pay attention to the email with the suffix “@forkfocus.com”.