ForkFocus Your most practical material handling solution provider Get a Solution

Hangcha X Series 6.0-10.0 Tonne Electric Forklifts

Where this truck fits

Heavy electric counterbalance forklifts with separate steering/braking and lifting hydraulic systems.

Final capacity depends on the actual load centre, lift height and hydraulic attachment. A long load or clamp can require the next chassis size.

Working advantages

  • Wide-view mast and overhead guard
  • Independent hydraulic circuits for combined operation
  • Intelligent fork-lowering buffer
  • Tool-free foot-panel removal
  • Optional cab, video monitoring, fork positioner and side battery removal

Information required before quotation

Provide the load weight and dimensions, lift height, aisle or yard condition, shifts, charger supply and attachment requirement.

Load centre Confirm from the real load dimensions, not an assumed 500 mm.
Mast Lift height, free lift, lowered height and overhead clearance.
Travel path Floor, ramp, outdoor surface and turning or aisle space.
Battery Operating hours, charging window and available mains supply.
Hydraulics Attachment type, carriage class and number of functions.

Available Models and Configurations

The range contains six chassis/load-centre positions, including two different 8 t configurations. The long-wheelbase 8 t version is rated at 900 mm, compared with 600 mm for the standard 8 t configuration.

Lead-acid configuration codes Rated load and reference centre Space requirement
CPD60-XC5 / CPD60-XD3 6,000 kg at 600 mm Width 1870 mm
Turning radius 3050 mm
CPD70-XC5 / CPD70-XD3 7,000 kg at 600 mm Width 1870 mm
Turning radius 3050 mm
CPD80-XC5 / CPD80-XD3 8,000 kg at 600 mm Width 1945 mm
Turning radius 3050 mm
CPD80-XLC5 / CPD80-XLD3 8,000 kg at 900 mm Width 1970 mm
Turning radius 3350 mm
CPD90-XC5 / CPD90-XD3 9,000 kg at 600 mm Width 1970 mm
Turning radius 3350 mm
CPD100-XC5 / CPD100-XD3 10,000 kg at 600 mm Width 2066 mm
Turning radius 3350 mm
Lithium configurations: all 12 model codes
  • CPD60-XC5-I / CPD60-XD3-I
  • CPD70-XC5-I / CPD70-XD3-I
  • CPD80-XC5-I / CPD80-XD3-I
  • CPD80-XLC5-I / CPD80-XLD3-I
  • CPD90-XC5-I / CPD90-XD3-I
  • CPD100-XC5-I / CPD100-XD3-I

The -I versions are listed separately with different battery weights and capacities. Check the complete model suffix and market specification when ordering.

Container-work variants: six separate model codes

CPD60-XC4-IX, CPD70-XC4-IX, CPD80-XC4-IX, CPD80-XLC4-IX, CPD90-XC4-IX and CPD100-XC4-IX.

The manufacturer labels this group “Not CE model”. These are separate container-work configurations, not interchangeable with the standard models above. Confirm the required destination-market specification before including one in a quotation.

Compare the exact lowered mast, overhead guard, lift height and actual container-door clearance. Do not assume every 6–10 t forklift can enter a container.

Hangcha Product USP

  • Independent hydraulic systems. Steering/braking and hydraulic lifting use separate systems to support combined operations.
  • Descending buffer. The listed intelligent lowering function reduces lowering speed near the ground.
  • Service access. Front/rear battery covers, side doors and a tool-free foot panel improve access for maintenance.
  • Lead-acid and lithium configurations. The source table distinguishes battery mass and capacity. Confirm the complete truck suffix and battery configuration.

Performance in Real Work

Parameter What changes the purchase decision
Laden travel speed 15 km/h at 6–7 t, 14.5 km/h at both 8 t versions, and 13.5 km/h at 9–10 t.
Laden lift speed 0.34 / 0.32 / 0.30 / 0.30 / 0.28 / 0.25 m/s for the six listed chassis positions.
Electrical system 96 V reference system, with lead-acid and lithium configurations listed separately.
Attachment supply 190 bar. The table lists 120 L/min at 6–8 t and 180 L/min at 9–10 t. Flow and pressure must match the fitted attachment.
Maximum gradeability, laden 16 / 15 / 14 / 13 / 12 / 12% across the six listed chassis positions.
Hangcha X 6–10 Tonne Electric Forklifts handling industrial loads
Match the load dimensions, floor, mast clearance and charging arrangement before confirming a truck.

Practical Checks Before Choosing the Tonnage

  1. Compare 8 t at 600 mm with 8 t at 900 mm. The long-wheelbase chassis is 2,500 mm rather than 2,030 mm and turns in 3,350 mm rather than 3,050 mm.

  2. Allow for the chassis at 9–10 t. Overall width increases to 1,970 or 2,066 mm in the listed versions. Check access, floor loading and pallet handling space.

  3. Specify the actual mast. Nominal capacity at the table reference is not a guarantee at maximum lift height. Use the matching mast capacity information.

  4. Check the charging and battery-change plan. The 96 V family has different lead-acid and lithium battery configurations, weights and service requirements.

  5. Match high-flow attachments carefully. The 9–10 t table lists 180 L/min. An attachment requiring less flow may need appropriate flow control.

  6. Distinguish ordinary counterbalance work from rough terrain. Tyre choice, ground clearance, braking and slope conditions must suit the actual surface. Larger capacity alone does not establish off-road suitability.

Series Comparison

Compare Selection implication
Standard 8 t vs long-wheelbase 8 t The 900 mm reference centre and longer chassis suit a different load geometry; check the actual load chart rather than assuming extra capacity at every height.
X 6–10 t vs XE 6–10 t lithium forklifts Compare full configuration, load centre, mast, battery handling, charging supply and duty. Series labels alone do not establish a lower operating cost.
Electric vs heavy-duty forklifts with IC power Compare local emissions, continuous travel, fuel or charging access, site surface and maintenance support for the same load.

Why Hangcha

Compare a defined truck configuration, rather than a nominal tonnage alone. The published model tables separate load centres, chassis dimensions, electrical configurations and mast options.

  • Full model codes distinguish configurations that share the same tonnage.
  • Mast tables and drawings support height and clearance checks.
  • Battery, hydraulic and maintenance details help plan the complete installation.

Why ForkFocus

ForkFocus connects the truck specification with the work you need to do. Send a known model, quantity and destination, or the main load and lift requirements if you need selection assistance.

  • Compare actual load centre, mast and available capacity.
  • Coordinate the attachment, hydraulic functions and mounting.
  • Plan the charger, spare parts and shipment with the truck.
A model-only quotation ForkFocus configuration review
Nominal tonnage and model code Load dimensions, required height and applicable load chart.
Standard carriage and hydraulics Attachment mass, effective thickness, pressure, flow and valve functions.
Truck supply Battery/charger supply, wear-parts identification and packing requirements.

See the Electric Forklift in Operation

Hangcha X series electric forklift demonstration. The video introduces the family; use the tables on this page for the 6–10 t configurations.

Selection Questions

Will the listed rated load remain available with a clamp?

No single rated figure covers every installed attachment. Check the truck chart at the required height, the attachment mass and geometry, and the attachment’s own rated capacity.

Can it replace a diesel forklift on our site?

Compare the actual surface, gradients, travel distance, shifts and charging supply. Outdoor capability does not make an electric counterbalance forklift a rough-terrain forklift.

What is needed for a first quotation?

A model code, quantity and destination are enough for an initial request. If the model is undecided, send the load weight, lift height and main working conditions. Drawings and detailed technical checks can follow.

Watch the manufacturer’s series video on YouTube

For the installed system, check forklift attachment compatibility, attachment capacity, model-specific spare parts and ForkFocus 360 Service.

Discuss Your Forklift Configuration

Configuration questions

Can the nominal capacity be used at every lift height?

No. Residual capacity changes with mast height, load centre and attachment. The working chart must be checked.

Can ForkFocus prepare a tender configuration?

Yes. Send the technical schedule and required documents so the truck, mast, battery, tyres and attachments can be checked as one package.

Confirm this truck against the real duty

Our forklift team will review the configuration before quotation.

Request Technical Matching

Ask For A quick Quote

We respond within two hours during our working hours, Monday to Friday, 9:00–18:00 Beijing Time (UTC+8). Enquiries received outside those working hours receive a response within eight hours. please pay attention to the email with the suffix “@forkfocus.com”.