1.0–3.8 t A Series IC Forklifts
The A Series is the value-focused mechanical platform for clear, standard-duty factory and yard work. Its long wheelbase, familiar powertrain layout and straightforward service access suit customers who need reliable capacity without paying for the higher-duty refinements of A2 or X.
Where this forklift fits
The A Series is the value-focused mechanical platform for clear, standard-duty factory and yard work. Its long wheelbase, familiar powertrain layout and straightforward service access suit customers who need reliable capacity without paying for the higher-duty refinements of A2 or X.
1.0–3.8 t at 500 mm load centre
13.5/14.5–19/20 km/h
0.34/0.36–0.58/0.60 m/s
Available models and configurations
Model suffixes identify engine, transmission, emission and market packages. ForkFocus confirms the full designation before quotation so the delivered truck, parts list and service documents match.
Product USP
Stable long-wheelbase layout
The longer wheelbase improves stability and residual capacity while reducing rear-axle load and steering-tyre wear.
Straightforward service access
A bolted front floor plate and open mechanical layout make routine engine and transmission inspection easier.
Protected air intake
The high-mounted independent air intake reduces dust ingestion in ordinary yard conditions.
Practical cooling package
A large aluminium radiator supports normal factory and outdoor duty.
Operator access
A smaller steering wheel, wider foot space and improved forward view make repeated entry and pallet handling easier.
Broad capacity coverage
One familiar A platform covers compact 1.0 t work through general 3.8 t factory handling.
Performance in real work
Travel: 13.5/14.5–19/20 km/h. Lift: 0.34/0.36–0.58/0.60 m/s.
Gradeability: 15–20%. Attachment hydraulics: up to 175 bar.
These figures become useful only after tyre type, engine package, load centre, mast height and attachment weight are confirmed. ForkFocus compares the complete working cycle—not one catalogue number.
Five selection points from practical forklift work
- Choose A when the load, route and shift intensity are clear; move to A2 or X when cooling, visibility or high utilisation justify the upgrade.
- Confirm engine suffix and emission level because CPCD model numbers can use different power packages.
- Long masts and hydraulic clamps can reduce residual capacity; the low purchase price should not drive an undersized configuration.
- For intermittent indoor use, review exhaust ventilation and consider LPG or electric alternatives.
- Include common filters, belts and seals with the initial shipment when local parts lead time is long.
Choose the platform by duty, not only price
| Platform | Practical difference | Best fit |
|---|---|---|
| A Series | Lowest initial investment of the three platforms | Standard-duty, clearly defined work |
| A2 Series | Improved visibility, cooling, sealing and braking life | More frequent cycles and better operator refinement |
| X Series | Higher duty-cycle, cooling and operator package | Longer shifts and repeated indoor–outdoor work |
Why Hangcha
The A platform keeps the mechanical package practical and serviceable while still covering a wide 1.0–3.8 t capacity range.
Customers can step up to A2 or X without leaving the Hangcha parts and technical-document ecosystem.
Why ForkFocus
We turn the model into a checked working specification. ForkFocus does not automatically push every customer to the most expensive series. We compare the real load, route, shift intensity, mast and Forklift Attachment so a clear standard-duty job can stay on the cost-effective A platform, with planned service parts and shipment arranged together.
Planned forklift parts, the correct Forklift Attachment and flexible shipment planning are integrated before dispatch.
See the equipment in operation
A relevant working video shows load behaviour, operator visibility and cycle flow more clearly than a specification table alone.
ForkFocus 360 Service continues from technical confirmation through inspection, documents, delivery and after-sales coordination.
Frequently asked questions
When is A Series the right choice?
When work is standard duty, the load centre is known and the truck does not need the higher cooling or operator package of A2/X.
Which capacity should I choose?
Provide load weight, dimensions, load centre, lift height and attachment information; nominal load weight alone is not enough.
What is the normal delivery time?
Small-capacity forklifts are normally planned at about 30 days after technical confirmation and deposit.
What warranty applies?
Normally 1–2 years or 2,000 working hours, whichever comes first.
Can ForkFocus supply service parts with the truck?
Yes. Filters, belts, seals and other planned service parts can be matched to the exact engine and truck suffix.
Confirm the forklift around the real load
Send the load dimensions, weight, lift height, route and required attachment. Our forklift team normally responds within two working hours.