Where this truck fits
Compact electric counterbalance forklifts with a small turning radius, AC travel control, regenerative braking and wide-view mast options.
Final capacity depends on the actual load centre, lift height and hydraulic attachment. A long load or clamp can require the next chassis size.
Working advantages
- Compact body and reduced turning radius for aisle work
- Automatic soft landing near floor level
- Regenerative braking and ramp anti-rollback
- Side battery removal options
- Full-opening covers and removable foot plate for service
Information required before quotation
Provide the load weight and dimensions, lift height, aisle or yard condition, shifts, charger supply and attachment requirement.
| Load centre | Confirm from the real load dimensions, not an assumed 500 mm. |
|---|---|
| Mast | Lift height, free lift, lowered height and overhead clearance. |
| Travel path | Floor, ramp, outdoor surface and turning or aisle space. |
| Battery | Operating hours, charging window and available mains supply. |
| Hydraulics | Attachment type, carriage class and number of functions. |
Hangcha Product USP
-
Compact and standard 2 t chassis. Compare the 1,888 and 1,990 mm turning-radius positions against the actual pallet aisle.
-
Separate battery configurations. The listed 48 V and 80 V versions let the battery plan be matched to the chosen chassis.
-
Buffered lowering and regenerative braking. Buffered lowering controls fork descent near floor level. Confirm the braking and lowering functions on the quoted equipment list.
-
Service access. Full-opening covers and a removable foot plate give access to maintenance areas.
Compare the Compact and Standard Chassis
A 2.0 t label does not identify one chassis. CPD20-XXJ4 is listed with a 1,888 mm turning radius, while CPD20-XJ4 is listed at 1,990 mm. Compare the complete model code with pallet orientation and stacking-aisle clearance.
The verified table below covers 1.0–3.5 t. For a 0.6 t requirement, ask ForkFocus to confirm a separate model and specification before quotation. Do not apply a 1.0 t truck specification to it.
| Complete model designation | Rated load and reference centre | Dimensions to compare |
|---|---|---|
| CPD10-XJ4 | 1,000 kg at 500 mm | Width 1060 mm; turning radius 1845 mm |
| CPD15-XJ4 | 1,500 kg at 500 mm | Width 1060 mm; turning radius 1845 mm |
| CPD18-XJ4 | 1,750 kg at 500 mm | Width 1125 mm; turning radius 1845 mm |
| CPD20-XXJ4 | 2,000 kg at 500 mm | Width 1125 mm; turning radius 1888 mm |
| CPD20-XJ4 | 2,000 kg at 500 mm | Width 1185/1235# mm; turning radius 1990 mm |
| CPD25-XJ4 | 2,500 kg at 500 mm | Width 1185/1235# mm; turning radius 2055 mm |
| CPD25-XLJ4 | 2,500 kg at 500 mm | Width 1235 mm; turning radius 2170 mm |
| CPD30-XJ4 | 3,000 kg at 500 mm | Width 1235 mm; turning radius 2195 mm |
| CPD35-XJ4 | 3,500 kg at 500 mm | Width 1260 mm; turning radius 2230 mm |
Read the width note. In the table, # marks the dimension with the 3 t brake configuration. The paired 1,185 / 1,235 mm figures are not identified here as single- and dual-wheel options.
Battery Versions Are Separate Configurations
Match the electrical system and battery arrangement. The listed smaller chassis use 48 V configurations. The CPD25-XLJ4, CPD30-XJ4 and CPD35-XJ4 table positions use 80 V.
Battery compatibility matters. Match the exact truck, charger and battery-compartment arrangement.
All additional model suffixes in the two specification tables
Lead-acid: CPD10-XC4 / CPD10-XD3 / CPD10-XC4-A, CPD15-XC4 / CPD15-XD3 / CPD15-XC4-A, CPD18-XC4 / CPD18-XD3 / CPD18-XC4-A, CPD20-XXC4 / CPD20-XXD3 / CPD20-XXC4-A, CPD20-XC5 / CPD20-XD3, CPD25-XC5 / CPD25-XD3, CPD25-XLC5 / CPD25-XLD3, CPD30-XC5 / CPD30-XD3, CPD35-XC5 / CPD35-XD3.
Lithium: CPD10-XJ4-I, CPD15-XJ4-I, CPD18-XJ4-I, CPD20-XXJ4-I, CPD20-XJ4-I, CPD25-XJ4-I, CPD25-XLJ4-I, CPD30-XJ4-I, CPD35-XJ4-I, CPD10-XC4-I / CPD10-XD3-I / CPD10-XC4-IA, CPD15-XC4-I / CPD15-XD3-I / CPD15-XC4-IA, CPD18-XC4-I / CPD18-XD3-I / CPD18-XC4-IA, CPD20-XXC4-I / CPD20-XXD3-I / CPD20-XXC4-IA, CPD20-XC5-I / CPD20-XD3-I, CPD25-XC5-I / CPD25-XD3-I, CPD25-XLC5-I / CPD25-XLD3-I, CPD30-XC5-I / CPD30-XD3-I, CPD35-XC5-I / CPD35-XD3-I.
Suffixes identify different configurations. Confirm destination-market specification and equipment list rather than substituting a code with the same nominal load.
Choose for the Actual Warehouse Job
| Buyer requirement | Configuration implication |
|---|---|
| Tight pallet aisles | Measure stacking space with the actual pallet length and width. Turning radius alone is not stacking-aisle width. |
| A heavier or longer load | Compare actual load centre and required height on the selected mast chart. A long load can consume the apparent capacity margin. |
| Multiple shifts | Compare measured operating hours, charging breaks, battery handling and supply voltage. Avoid assuming one battery suits every shift. |
| A clamp or fork positioner | Account for attachment mass, forward offset and hydraulic functions before selecting the chassis. |
Performance in Real Work
| Model group | Travel, laden / unladen | Lift, laden / unladen | Max. gradeability, laden / unladen |
|---|---|---|---|
| CPD10-XJ4 | 16.5/17.5 km/h | 450/650 mm/s | 20/20% |
| CPD20-XJ4 | 17/17.5 km/h | 380/600 mm/s | 20/20% |
| CPD35-XJ4 | 15/16 km/h | 330/500 mm/s | 17/19% |
Compare the handling cycle. Travel distance, lifting height, loading frequency and hydraulic work determine whether these parameters fit the shift. Compare these figures with the actual handling task.
Plan repeated ramp work separately. Maximum gradeability is a test specification. Frequent ramp duty also needs braking, tyre grip, load stability and heat assessment.
Series Comparison
Pallet work in ordinary aisles. A compact four-wheel counterbalance forklift can serve receiving, production and dispatch when its load chart and aisle requirement fit the site.
For mainly indoor work with tighter turning space, compare three-wheel and four-wheel electric forklifts. For heavier loads, compare the X Series 4–5 t electric forklifts with the same load-centre and mast requirements.
Discuss Your Working Conditions
Why Hangcha
Compare a defined truck configuration. The model groups and dimensions on this page distinguish trucks that share a nominal tonnage.
- Use the full model suffix and rated load centre.
- Compare the actual chassis, tyre arrangement and clearance.
- Match the mast chart and selected battery specification.
Why ForkFocus
Put the work requirements into the quotation. ForkFocus can coordinate the truck, attachment, battery and shipment around the proposed application.
- A known model, quantity and destination allow a first request.
- Undecided buyers can send the main load and lift requirements.
- Detailed capacity, hydraulics and parts checks follow with the selected configuration.
| A model-only request | ForkFocus configuration review |
|---|---|
| Nominal rated load | Actual load centre, required height and attachment-adjusted capacity. |
| Standard truck configuration | Mast, tyres, battery and charger for the intended work. |
| Attachment name | Carriage, pressure, flow, functions, mass and geometry. |
| Basic parts request | Model-specific wear-parts identification and support requirements. |
| Truck supply | Packing, shipment and agreed inspection scope. |

ForkFocus Quotation and Configuration Support
Known model or undecided specification? For a model already selected, send the complete model code, quantity and destination. If you need help selecting, send the main load weight, lift height and working conditions, with detailed drawings to follow.
Coordinate the complete equipment package. ForkFocus can compare the mast and applicable capacity chart, attachment mounting, hydraulic functions, battery, charger and wear-parts identification for the proposed truck.
Check attachment compatibility, capacity with an attachment and ForkFocus 360 Service when planning the supplied configuration.
See the Electric Forklift in Operation
Manufacturer X Series lithium-electric overview. It illustrates the product family; use the model tables for the listed 1.0–3.5 t configurations.
Watch the manufacturer video on YouTube
Model-Specific Selection Questions
Why are there two 2 t chassis?
The model table lists compact and standard positions with different dimensions. Compare the actual pallet aisle, wheelbase and selected load chart rather than tonnage alone.
Can a lithium battery be fitted to any listed truck?
The lithium versions have separate full codes and battery specifications. Confirm the truck configuration, battery compartment, BMS and charger together.
Configuration questions
Can the nominal capacity be used at every lift height?
No. Residual capacity changes with mast height, load centre and attachment. The working chart must be checked.
Can ForkFocus prepare a tender configuration?
Yes. Send the technical schedule and required documents so the truck, mast, battery, tyres and attachments can be checked as one package.
Confirm this truck against the real duty
Our forklift team will review the configuration before quotation.

