1.5–3.8 t A2 Series IC Forklifts
A2 is the practical upgrade from the basic A platform. It keeps a familiar mechanical truck layout but improves visibility, cooling, sealing, service space and grade performance for customers who run more cycles without needing the full X-platform specification.
Where this forklift fits
A2 is the practical upgrade from the basic A platform. It keeps a familiar mechanical truck layout but improves visibility, cooling, sealing, service space and grade performance for customers who run more cycles without needing the full X-platform specification.
1.5–3.8 t at 500 mm load centre
17.5–20 km/h
0.40/0.42–0.62/0.64 m/s
Available models and configurations
Model suffixes identify engine, transmission, emission and market packages. ForkFocus confirms the full designation before quotation so the delivered truck, parts list and service documents match.
Product USP
8% wider front view
An ultra-wide mast and lower dashboard improve fork and load visibility.
Lower centre of gravity
Reduced front overhang and revised balance improve stability and residual-capacity behaviour.
10% better cooling
The optimized radiator and airflow provide more margin for repeated cycles.
10% more service space
Hood access and component layout reduce the effort of routine inspection.
Improved hydraulic sealing
24° tapered connections reduce leakage risk compared with ordinary straight fittings.
Higher grade options
Selected H7 engine packages reach stronger grade performance for ramps and outdoor work.
Performance in real work
Travel: 17.5–20 km/h. Lift: 0.40/0.42–0.62/0.64 m/s.
Gradeability: up to 35% by engine package. Attachment hydraulics: 14.5–17.5 MPa.
These figures become useful only after tyre type, engine package, load centre, mast height and attachment weight are confirmed. ForkFocus compares the complete working cycle—not one catalogue number.
Five selection points from practical forklift work
- A2 is often the best middle choice when A is too basic but X would add specification the customer does not use.
- For ramp work, compare laden gradeability and brake package—not the unloaded figure.
- Hydraulic sealing matters when a clamp or rotator adds constant hose movement and auxiliary pressure.
- Check whether the quoted engine package is standard or H7; grade performance can differ materially.
- Use the better mast view to improve pallet alignment, but still specify cameras or lighting where loads block the operator view.
Choose the platform by duty, not only price
| Platform | Practical difference | Best fit |
|---|---|---|
| A Series 1.0–3.8 t | Value-focused standard platform | Light and medium standard duty |
| A2 Series 1.5–3.8 t | Better visibility, cooling, sealing and service space | Medium-to-higher utilisation |
| X Series 1.5–3.8 t | Stronger vibration, cooling and operator package | Longer shifts and repeated outdoor travel |
Why Hangcha
A2 gives customers a genuine intermediate platform rather than forcing a choice between basic A and higher-duty X.
The measurable changes in visibility, cooling, sealing and access address real operating and maintenance costs.
Why ForkFocus
We turn the model into a checked working specification. ForkFocus compares A, A2 and X against the customer’s route and shift intensity instead of quoting by price alone. The mast, tyres, engine suffix, Forklift Attachment, service parts and shipment are confirmed as one practical material-handling solution.
Planned forklift parts, the correct Forklift Attachment and flexible shipment planning are integrated before dispatch.
See the equipment in operation
A relevant working video shows load behaviour, operator visibility and cycle flow more clearly than a specification table alone.
ForkFocus 360 Service continues from technical confirmation through inspection, documents, delivery and after-sales coordination.
Frequently asked questions
How does A2 differ from A?
A2 improves mast visibility, cooling, hydraulic sealing and service access, and offers stronger grade packages.
How does A2 differ from X?
X is positioned for higher duty cycles and stronger operator/cooling refinement. A2 is the economical middle platform.
What is the normal delivery time?
Normally about 30 days after technical confirmation and deposit.
What warranty applies?
Normally 1–2 years or 2,000 working hours, whichever comes first.
Can it use hydraulic clamps?
Yes. Load size, packaging surface, clamp opening, auxiliary flow/pressure and residual capacity must be confirmed.
Confirm the forklift around the real load
Send the load dimensions, weight, lift height, route and required attachment. Our forklift team normally responds within two working hours.